Hornby HM7000-N18TXS: Bluetooth & DCC Sound Decoder (NEXT18-PIN)

Part of the innovative new HM7000 range, this Next18-pin Bluetooth® and DCC sound decoder is ready to plug into locomotives featuring a Next18 (NEM662) socket. You'll find the Next18 socket in many modern Hornby locos in OO, HO, and even some smaller gauges.

This decoder is designed to supply 1000mA continuous load to the main motor and a peak demand of 1500mA.

It has sound capabilities and a high-quality 'sugar-cube' miniature speaker that you can easily plug into the decoder.

You’ll also find assorted ‘speaker enclosures’ in your pack. When installing the speaker inside your locomotive, pick the largest enclosure that will fit to get the best sound reproduction.

Download your first set of sounds and install them via the HM7000 app. You can download different sound packs and change those on your decoder later if you wish.

**

You can buy an R7377 Power Bank separately and add it to this decoder. It is easiest to do this during the first install. The Power Bank will keep the loco operating during short power outages when running over dirty track or complex points - keeping the sounds operating and the loco moving.

**

Box Contents:

1 decoder,

1 sugar-cube speaker,

1 set of assorted speaker enclosures.

Not included:

Controller - download the HM7000 free app from your App Store,

R7377 Power bank (available separately),

Locomotive.

Contents:

1 Decoder, 1 Sugar-cube Speaker, 1 set of assorted speaker enclosures.