Monocure 3D Rapid Model Resin 1L (Grey)

Monocure 3D Rapid Model Resin 1L (Grey)

$84.99

Description

Our Rapid Model Resin range was originally developed around MSLA printers that used lower powered LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake then, pour and print! The typical normal layer durations for a colour-based MSLA printer are 5-6 seconds per layer or 3 seconds in a printer with a monochrome LCD. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning.

Physical Properties
Viscosity500 – 600cps @ 25°C (Brookfield RVT)
Shelf Life36 months
Active Solids100%
UV Cure225nm to 420nm
Cure SpeedFast with UV LED
StorageDark Cool, dry place out of direct sunlight
Wash UpRESINAWAY® or IPA (Isopropyl Alcohol)

Specifications

Brand Monocure 3D