Prime RC Turbo Bushmaster PNP RC Plane, Night Version, PMQTBMNIGHT

The Prime RC Turbo Bushmaster is a PNP STOL capable high-wing aircraft with 3D aerobatic performance and very smooth slow flight characteristics. 

• Lightweight yet robust EPO foam with composite reinforcements.
• The wings utilise a thick airfoil with very large flaps and ailerons (approx. 40% of the total area). The flaps can be switched to a control surface via the transmitter and are suitable for extreme 3D manoeuvres
• Oversized air-filled tyres with valve for shock-absorbing properties. Take-offs and landings on almost any surface
• Short take-off characteristics (with flaps fully set) can be as low as approx. 1 - 2m
• Short landing characteristics due to large landing flaps and the possibility to switch them with the ailerons e.g., as butterfly.
• Complete night flight lighting in the fuselage and in the wings, switchable via the transmitter
• Various access hatches to all components on the fuselage and a large battery compartment for 6S LiPo batteries from 3000-4200mAh
• 2-piece wing with fibreglass tube wing joiner
• 5015 brushless motor 550KV

The Prime RC Turbo Bushmaster is an 1830mm span 6S STOL capable high-wing aircraft with very smooth slow flight characteristics and amazing 3D aerobatic performance. It comes as a Plug-n-Play version. Simply add your receiver, and a 6S battery, and program your Tx.

The large air-filled and shock-absorbing tyres make short take-offs and landings possible on almost any surface. The 6S LiPo compatible brushless motor in combination with an 80A Hobbywing controller (with EC5 connector) and a 15x7” wooden propeller has proven to be the optimal setup for impressive climb performance and a very good top speed. The long flight time of 8-12 minutes with a 4200mAh 6S LiPo battery is the perfect combo for the ambitious sport pilot and the 3D pilots. The integrated night flight lighting, which illuminates the entire fuselage and the wings from the inside, really adds to the value this model offers.