Tamiya 1/10 Sand Scorcher 2WD Off-Road Racer RC Kit 58452

Tamiya 1/10 Sand Scorcher 2WD Off-Road Racer RC Kit 58452

Now  $467.99

Description

Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the Baja 1000 in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you.

FEATURES:

Chassis: 0.08 (2mm) thick FRP main frame with duralumin plate for
added strenth and flexibility
Drive: Rear wheel
Motor: 540 type
Electronic Speed Control: Tamiya TBLE-02 with Tamiya type battery
connector
Transmission: Single-speed
Gearbox: Transparent plastic, fully enclosed, die cast metal and
clear resin components
Body: Polystyrene, trimmed and molded in white
Bumper: Front reinforced resin with integrated metal bars
Shocks: Oil filled
Ball Bearings: Full set
Tires: Front ribbed 2.7" (69mm) diameter, 0.71" (18mm) wide
Rear paddle 3.1" (79.5mm) diameter, 1.6" (40mm) wide
Wheels: Three-piece center lock, molded in white
Suspension: Front double trailing arm, die cast front and rear arms
and metal uprights, swing axle rear suspension with metal torsion
bars
Camber: Non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Bellcrank type with servo saver

INCLUSION: Sand Scorcher Buggy Kit, 540 motor, white plastic body, tires, wheels oil-filled shocks, decals, 15T pinion gear, instruction manual, 70 tooth spur gear, driver bust and ESC

REQUIREMENTS:

Radio: 2-Channel with one servo
AA Radio Batteries: Eight for transmitter
Battery: Tamiya recommends a small 7.2V battery such as the
Duratrax Onyx NIMH 7.2V 1300mAh Stick Pack for 1/18 scale vehicles
Connector: Standard Plug to Micro Plug Adapter to mate
with ESC if using battery listed above
Charger: Compatible with selected battery
Paint: Tamiya TS series lacquer or equivalent
Misc. Items: Building and track equipment

SPECIFICATIONS:

Length: 15.7" (400mm)
Width: 8.3" (210mm)
Height: 5.9" (150mm)
Weight: 3.8lbs (1730g)
Length: 13.6" (345mm)
Width: 6.8" (173mm) at widest point
Height: 4.7" (120mm)
"

Specifications

Brand Tamiya